Multi-cell cyclones with good particle recovery down to 5 microns [and below]


 
 

Van Tongeren’s "Multi-cell" cyclone has been developed to produce the highest efficiency possible with any form of cyclone to meet very high standards of emission control and product recovery, with good particle recovery down to 5 micron [and below}

 
   

Multi-cell cyclones with good particle recovery down to 5 microns [and below]

Van Tongeren’s "Multi-cell" cyclone has been developed to produce the highest efficiency possible with any form of cyclone to meet very high standards of emission control and particle collection.

This latest design of Van Tongeren "Multiclone" comprises small diameter cyclones, employing swirl vanes to rotate the solids bearing gases for separation. For the majority of applications, these small cells usually 300mm diameter are nested closely together and housed in rectangular or round casings and because of their small diameter have higher collection efficiencies than conventional large diameter cyclones, however a full range of varying sizes of cells is available to suit specific applications, particularly for general air pollution control and boiler emissions
Van Tongeren do not make "blanket claims" to recover 99.9% of ALL particles down to 5 microns since many variables affect the performance of cyclones and all of these must be taken into account for every application design. However Van Tongeren cyclones as built and supplied by Kentech and designed by Van Tongeren, have many results showing good recovery down to 5 microns for air pollution control

These "Multiclone" cyclone separators are individually designed for high efficiency for each specific application and duty, taking into account all the operating variables, using computerised programmes and a data bank of information compiled over 80 years and many successful installations.

Van Tongeren's “Multiclone”, which due to it’s simplicity, high efficiency, and compactness, is well worth consideration as an alternative to expensive Bag Filters or Precipitators, but for far less capital, operating and maintenance costs.

multicyclone

All Van Tongeren "Multiclones" are manufactured locally and offer a high degree of efficiency for many operating conditions and quite suitable for the following

  • All forms of industrial processes requiring Powder recovery
  • All types of solid fired Boilers
  • Coal and bagasse fired boilers
  • Designed as Pressure vessel
  • Fluidised bed combustors.
  • Particle recovery down to 5 microns and below.
  • Very high efficiency

If you have a problem and need to conform to NEW air pollution control regulations, Why not ask us first, we may have the answer and save you the expense of more complicated and maintenance intensive equipment.

 





 


© Copyright 2009 - 2010 Kentech SA - Built by Able Apple
| Home | Contact Us | Profile | Filtering & Seperation | Straight Belts | Heat Belts | Cooling Belts | Conveyor Belts | Refractory Armouring | Gas Liquid Seperators
| Liquid to Liquid Seperators | Woven Wire Cloth | Wedge Wire | Fabricated Parts | Perforated Plates | Air Pollution Control | Petrochemical Cyclones | Multi Cyclones
| Air Pollution Control Advantages | | Filtration & Separation Advantages | Petrochemical Components Advantages | Refractory Armouring Advatages
| Wire Mesh Conveyor Belts Advantages |